Flooring Products
Systems for Repair, Protection, Waterproofing Slip-Proofing,
Chemical Resistance and Appearance Enhancement of Commercial & Industrial Floors
|
|
Cement-Based Leveling & Resurfacing
RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6, RL-7
RL-Series latex-modifiers are unique, reactive acrylic additives designed to enhance the performance of Portland cement-based materials. When added to cement-based mortars, patches, plasters and coatings,
RL-Series latex modifiers improve mechanical performance, workability, adhesion and resistance to freeze-thaw and harsh environmental exposures.
EXPO 43 Latex-Modified, Cement-Based Wall Coating
System 44 Concrete Repair Mortars
Custom SYSTEM 45 Custom Color Masonry Repair & Coating Compounds
DECK-TOP 47, 47-RC Thin Resurfacers for Concrete Floors and Decks (Regular & Rapid-Cure Formulas)
SYSTEM 49 CPBA Corrosion Resistant Primer and Bonding Agent for Embedded Reinforcing Steel
FLO-PLUG 50 Hydraulic Cement
LEVEL-X52, Self-Leveling, Self-Smoothing Polymer Modified Floor Topping LEVEL-X 52 is a one part, cement-based, polymer modified floor topping and leveling compound
designed to provide smooth and level interior or exterior floors and decks with a minimum of time and labor. LEVEL-X 52
can be used to prepare a wide variety of sub-floors for installation of tile, carpet, resilient flooring, wood flooring and many types of surface coatings. It may also be left exposed as a final
finish in light industrial or commercial environments.LEVEL-X 52 also provides rapid, economical
casting, repair and leveling in exterior exposures and in wet environments. It readily accepts a variety of finishes, or may be left exposed to traffic and weather
PUMP-X 53, 53i, 53iE, 53iL Pumpable Cementitious Grouts
Epoxy-Based Patching
Odorless, moisture-insensitive, 100% solids epoxy overlays, patching mortars, concrete and
bonding agents provide fast turnaround, non-shrink stability and higher strength and chemical resistance than cement-based mortars, where required.
FLEXI-MATRIX 545 Epoxy Polymer Concrete
FLEXI- TOP 550 Overlayment and Resurfacing Mortar FLEXI-TOP 555 Repair Mortar
FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives
Bonding Agents
FLEXI-BOND 540 Epoxy Bonding Agent (New Concrete to Old Concrete)
FLEXI-WELD 520, 520T Epoxy Adhesives
Crack Repair
FLEXI-SEAL 510, 510-U Flexible Epoxy Crack Fillers
FLEXI-FILL 530 Epoxy Filler
Floor & Deck Primer
FLEXI-DECK 500-L Oil-Tolerant 100% Solids Primer
Waterborne Coatings
AQUATHANE UA-210 Types E, EE, F, NCL and H-A/G Waterborne Polyurethane Coatings
AQUEPOXY 250 Waterborne Immersion-Grade Epoxy
Epoxy Coatings & Flexible Epoxy Membranes
FLEXI-DECK 500-E Modified Epoxy Flex-Coat
FLEXI-GARD 500-N Novolac Epoxy Coatings FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy
FLEXI-GARD 500-S Low Viscosity Epoxy Coatings
FLEXI-DECK 500-U Urethane-Epoxy Elastomeric Deck Coating
Maximum Chemical Resistance
FLEXI-GARD 500-N Novolac Epoxy Coatings FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy
Fast-Cure/Low Temperature
FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives
|