EPOXY COATINGS, FLOORING AND RESTORATION PRODUCTS
The following is a link list of epoxy flooring, coating and restoration products. For our Epoxy
Flooring Technical Manual, Click Here.
Crack Repair
FLEXI-SEAL 510, 510-U Flexible/Elastomeric Epoxies Permanently flexible,
elastomeric epoxies provide effective repair of small "working" cracks, control joints. Can be mixed with aggregates for impact and thermal shock resistant patches, joint nosings and toppings
FLEXI-WELD 520, 520T Epoxy Adhesives Low viscosity, injection/gravity-fill grade (520) and thixotropic paste grade (520T) adhesives provide hard, high strength bonding of cracks and broken concrete
Bonding Agents
AQUEPOXY 250 S-30 Waterborne Epoxy Sealer/Primer
Low odor primer may be used on damp or "green" concrete
FLEXI-BOND 540 Epoxy Bonding Agent Bonds new concrete to existing
concrete while acting as between-slab waterproofing and substrate consolidant
Floor & Deck Primers
FLEXI-DECK 500-L Oil-Tolerant 100% Solids Primer Low viscosity, flexible, odorless primer,
bonds to ceramic and vinyl tile, wood, smooth concrete, oil-contaminated concrete and metal, many previous epoxy coatings
Waterborne Coatings
AQUEPOXY 250 Waterborne Immersion-Grade Epoxy High-gloss, chemical and water-resistant waterborne epoxy coating for floors, walls,
machinery surfaces. Suitable for continuous water immersion after cure, may be applied to damp or "green" concrete
AQUATHANE UA-210H Waterborne Aliphatic Urethanes
USDA-accepted, self-crosslinking coating for light industrial floors, walls, machinery surfaces, interior or exterior Excellent UV and solvent resistance, fast dry, low odor
Epoxy Coatings
FLEXI-GARD 500-S Low Viscosity Epoxy Coatings
100% solids, odorless, USDA-accepted clear or colored floor coatings Also
available in 90% solids (500S-90) and 60% solids (500S-60), for easy handling and low costWithstand a wide range of chemical exposures
Marine-FLEX 570
is a 100% solids, medium viscosity, moisture insensitive epoxy coating intended for heavy marine and wet industrial exposures. Marine-FLEX 570 CAN BE APPLIED UNDERWATER
, as well as on wet, damp or dry concrete or steel surfaces of exposed to air.
Flexible Epoxy Membranes
FLEXI-DECK 500-E Modified Epoxy Flex-Coat Low viscosity, odorless, 100% solids, self-priming
flexible epoxy coating. Used as elastomeric primer for rigid epoxies, as flexible hardcoat over 500-U membranes, or for mechanical room and industrial floor membranes
FLEXI-DECK 500-U, 500-ULT Urethane-Epoxies High elongation permits use as waterproof,
crack bridging surface for floors and decks, interior or exterior. Low temperature, fast-curing grade 500-ULT. Permanent flexibility, even at sub-zero (F) temperatures
Maximum Chemical Resistance
FLEXI-GARD 5OO-N Novolac Epoxy Coatings 100% solids, odorless, clear or pigmented
Novolac/Bis F Epoxy resists many concentrated acids, alkali and solvents. Provides higher temperature performance than standard epoxy coatingsMay be applied direct to substrate or primer, or over flexible base coat
for use in secondary containment applications
FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy 100% solids flexibilized
Novolac/Bis F/Urethane coating improves crack-bridging performance of chemical resistant, reinforced FLEXI-GARD 500-N secondary containment systems
Epoxy-Based Patching
Odorless, moisture-insensitive, 100% solids epoxy overlays, patching mortars, concrete and bonding agents provide fast turnaround,
non-shrink stability and higher strength and chemical resistance than cement-based mortars, where required.
FLEXI-MATRIX 545 Epoxy Polymer Concrete Impermeable, high-strength, gravel-extended, high slump epoxy concrete for structural,
chemical resistant, poured in place floors, walls, machinery bases and footings
FLEXI- TOP 550 Overlayment and Resurfacing Mortar
Low viscosity epoxy with fine aggregate, for self-leveling tile-like patches and overlays
FLEXI-TOP 555 Repair Mortar
Dense, high-strength, trowel-grade mortar for general purpose patching
Fast-Cure/Low Temperature
FLASHEPOXY 580-Series Acrylate-Epoxies
100% solids, low odor/toxicity, mercaptan-free formulation permits coating and patching down to -220F, for winter,
refrigerator, freezer and fast-cure applications. Moisture tolerant, non-flammable, "0" VOC, non-shrink
Anti-Slip Flooring
FLEXI- QUARTZ 500-2 Wide variety of textures and colors are achieved by broadcasting select aggregates into FLEXI-GARD 500-S
FLEXI-DECK 500-E, 500-U Broadcast aggregates are routinely
used to provide pedestrian and vehicular non-slip surfaces
|