NEW!Ultimate Mortar Although properly proportioned, installed and cured masonry repointing mortar should be expected to provide at least 50 years of service, actual results too often fall far short of that. The
reasons can frequently be traced back to shortcuts taken in the repointing process, including omission of labor-intensive steps required to minimize shrinkage and maximize bond strength. A new
pre-packaged mortar system can greatly simplify repointing requirements, providing reliable high performance while reducing labor requirements.
SILAN-TREAT 88C Thixotropic Silane Water Repellent Higher Viscosity = Deeper Penetration = Greater Durability
SILAN-TREAT 88C
is a reactive paste-grade silane water repellent that provides exceptional depth of penetration and durability of protection for concrete
, stucco and other alkaline building materials. It is particularly effective on high density concretes with compressive strengths of 12,000 psi (83 MPa) or more. Read More...
Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. BioLime NHL 3.5 Buff is a product of Italy. BioLime NHL 2, NHL 3.5 White and NHL 5.0 are Products of France.
Marfil is a Product of Spain. SILAN-TREAT 88C is produced in Germany.
Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This
publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and
information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a
warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages
whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that
he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by
the Edison Coatings, Inc. CONDITIONS OF SALE.Privacy Policy.
Copyright 2016, Edison Coatings, Inc. All rights reserved.